Slimline Vacuum Table 6040

The slimline 6040 vacuum table has a height of just 11 mm which allows a minimal vacuum pump requirement whilst maintaining a high air flow over its surface area, achieved with 0.6 mm holes in a 20 x 20 mm grid.

High airflow - Due to a height of 11 mm, a 20 x 20 mm grid of 0.6 mm holes our slimline tables have a minimal pump requirement whilst able to maintain a high air flow over its surface area.

Port - Made from thermoplastic PLA our heavily tested and rigid 3D printed connector port can be supplied in a range of sizes; 25 mm (1"), 32 mm (1.25") and 38 mm (1.5").

Cost effective - The slimline series means you don't have to use a vacuum pump with a high airflow to achieve results in fact a shop vacuum cleaner is likely to be enough.

The table can be attached using its mounting holes for M6 countersunk screws suitable for t-slot plates with 50 mm groove spacing such as our standard aluminium t-slot plates.

A minimum vacuum generator airflow of 40m³/h is recommended.