All Products

The liquid ring pump 50 ST provides a liquid volume output of 550 litres per hour. Ideal for vacuum clamping setups where coolant is being used, recirculation of the liquid ensures constant cooling with separation of surplus swarf automatically. Compression is achieved by feeding the liquid (usually water) into the p..

Our X-Block 8060 t-slot plate is made from C45 grade steel with a cross groove.Dimensions: 800 mm (31.49") x 600 mm (23.62")Profile height: 50 mm (2")T-slot spacing: 50 mm (2")Tolerance / Accuracy: +/- 0.01 mm / 150 mm..

Specifications:Measurements: 420 x 320 x 42 mmClamp and mill work pieces fast and easyBoth sides magneticMachined from a solid block constructionFit for coolantPoles: 12Clamping force: 7.8 tonne..

Specifications:Measurements: 600 x 320 x 42 mmClamp and mill work pieces fast and easyBoth sides magneticMachined from a solid block constructionFit for coolantPoles: 18Clamping force: 11.7 tonne..

Our X-Block 10050 t-slot plate is made from C45 grade steel with a cross groove.Dimensions: 1,000 mm (39.37") x 500 mm (19.68")Profile height: 50 mm (2")T-slot spacing: 50 mm (2")Tolerance / Accuracy: +/- 0.01 mm / 150 mm..

Specifications: Measurement: 620 x 270 x 51 mmClamp and mill workpieces fast and easyMachined from solid block constuctionFit for coolantPoles: 24Clamping force: 9.6 tonne..

Finely milled t-slot plates made from C45 tooling steel with a profile height of 20 mm (2 inches).Made to our exacting standards with a smooth finish on its underside our finely milled t-slot plates are ideal for suctioning onto a vacuum table or being used directly on your host machine.And makes it easy to mount v..

Specifications:Measurements: 420 x 405 x 42 mmClamp and mill work pieces fast and easyBoth sides magneticMachined from a solid block constructionFit for coolantPoles: 16Clamping force: 10.4 tonne..

The A0 FAL Series vacuum table is manufactured entirely from cast aluminium and offers high precision. Its grid of holes, measuring 0.6 mm, and very smooth surface make it ideal for vacuum clamping thin or flexible materials such as; film, paper or thin plastics. Items included ..

Specifications: Measurement: 780 x 270 x 51 mmClamp and mill workpieces fast and easyMachined from solid block constuctionFit for coolantPoles: 30Clamping force: 12 tonne..

Specifications: Measurement: 490 x 400 x 51 mmClamp and mill workpieces fast and easyMachined from solid block constuctionFit for coolantPoles: 30Clamping force: 12 tonne..

Our X-Block 10060 t-slot plate is made from C45 grade steel with a cross groove.Dimensions: 1,000 mm (39.37") x 600 mm (23.62")Profile height: 50 mm (2")T-slot spacing: 50 mm (2")Tolerance / Accuracy: +/- 0.01 mm / 150 mm..

Specifications: Measurement: 490 x 470 x 51 mmClamp and mill workpieces fast and easyMachined from solid block constuctionFit for coolantPoles: 36Clamping force: 14.4 tonne..

The side channel blower SV 170T produces an air flow of 170 m3/h and vacuum pressure of 1,040 mbar. These make them ideal for vacuum clamping large work pieces across large areas or where there is considerable leakage. It functions by transporting air by rotating a fan with blades through a close narrow fitting housi..

The oil lubricated DSN 100 is a low noise vane type rotary vacuum pump and provides 0.5 mbar at 99.5% vacuum. Self lubricating vanes are made from graphite carbon. For safety and easy control an on / off switch with engine protection and 4 meters of cable is included. ..

Specifications: Measurement: 620 x 400 x 51 mmClamp and mill workpieces fast and easyMachined from solid block constuctionFit for coolantPoles: 40Clamping force: 16 tonne..